Cooper&Hunter Mini-Splits in Canada

Cooper&Hunter Mini-Splits in Canada

For Canadian homeowners looking for a reliable, energy-efficient heating and cooling solution, Cooper&Hunter mini-splits are an excellent choice. With decades of experience selling and installing these systems, we’ve seen firsthand how Cooper&Hunter delivers consistent performance in Canada’s extreme climate conditions, from freezing winters in the Prairies to humid summers in Ontario.

One of the key advantages of Cooper&Hunter mini-splits is their advanced inverter technology, which allows the system to adjust power output dynamically to maintain a steady temperature. Unlike traditional HVAC systems that frequently cycle on and off, Cooper&Hunter mini-splits operate with greater efficiency, resulting in lower electricity bills and improved comfort.

Beyond efficiency, Cooper&Hunter mini-splits are known for their ultra-quiet operation, flexible installation options, and advanced smart controls. Whether you need a single-zone unit for a small space or a multi-zone system for an entire home, Cooper&Hunter provides high-quality, ductless climate control solutions designed for Canadian homes.

Cooper&Hunter Mini-Splits SEER Rating

When it comes to energy efficiency, Cooper&Hunter mini-splits stand out with their high SEER (Seasonal Energy Efficiency Ratio) ratings. SEER measures how efficiently an air conditioning system cools a space over a season, with higher SEER ratings indicating lower energy consumption and greater cost savings. Cooper&Hunter mini-splits typically offer SEER ratings between 20 and 30+, making them far more efficient than traditional HVAC systems.

A major reason for these high SEER ratings is Cooper&Hunter’s inverter-driven compressor technology. Unlike conventional HVAC units that frequently turn on and off—consuming excess energy—Cooper&Hunter mini-splits modulate their power dynamically, reducing energy waste while maintaining consistent indoor temperatures. Additional energy-saving features, such as programmable timers, eco-modes, and smart Wi-Fi controls, further optimize energy efficiency.

For homeowners looking to cut cooling costs, upgrading to a high-SEER Cooper&Hunter mini-split can lead to significant energy savings. Compared to traditional HVAC systems with SEER ratings between 13 and 16, Cooper&Hunter’s high-performance models can reduce cooling costs by up to 50%. No matter your climate, investing in a high-SEER mini-split ensures maximum comfort with minimal energy waste.

Buyer’s Guide to Cooper&Hunter Mini-Splits

Investing in a Cooper&Hunter mini-split is a smart decision for homeowners looking to improve comfort, reduce energy costs, and enhance efficiency. However, with various models and features available, choosing the right system requires some key considerations. This guide will help you navigate why Cooper&Hunter mini-splits outperform traditional HVAC systems, how to select the right unit, and what to expect based on your climate zone.

Whether you’re retrofitting an older home, upgrading an inefficient system, or installing climate control in a new build, Cooper&Hunter mini-splits offer flexibility, high-performance heating and cooling, and energy-saving smart technology. Below, we’ll explore the advantages of mini-splits, how to choose the right model, their performance in Canadian climate zones, and more.

Advantages of Cooper&Hunter Mini-Splits Over Traditional HVAC Systems

Cooper&Hunter mini-splits offer several key advantages over traditional HVAC systems, making them a superior choice for heating and cooling in Canadian homes.

1. Higher Energy Efficiency

Unlike central HVAC systems that rely on ductwork, mini-splits deliver conditioned air directly into a room, avoiding the 20-30% energy losses that occur with ducted systems. Cooper&Hunter mini-splits use inverter-driven technology, allowing them to adjust their output dynamically, which leads to lower energy bills and a smaller carbon footprint.

2. Zoned Comfort Control

With Cooper&Hunter mini-splits, homeowners can set individual temperatures for each room, ensuring customized comfort and reducing energy waste. Traditional central HVAC systems heat and cool the entire home at once, often resulting in uneven temperatures and higher energy costs. With multi-zone capabilities, Cooper&Hunter mini-splits let you control each space independently, maximizing efficiency.

3. Easier Installation & Flexible Placement

Because Cooper&Hunter mini-splits do not require ductwork, installation is faster, easier, and less invasive compared to central air systems. They are ideal for:
✔ Older homes without existing ductwork.
✔ Renovations, home additions, and basements where running ducts would be expensive.
✔ Apartments, condos, and smaller spaces that need an efficient heating and cooling solution.

Their sleek, compact design also makes them more aesthetically appealing than bulky air handlers or noisy window units.

With superior efficiency, zoned comfort, and easier installation, Cooper&Hunter mini-splits provide a modern, cost-effective alternative to traditional HVAC systems.

How to Choose the Right Cooper&Hunter Mini-Split for Your Home

Selecting the right Cooper&Hunter mini-split requires considering room size, climate, and energy needs. Follow this step-by-step guide to find the best model for your home.

1. Determine the Right BTU Capacity

Choosing the correct BTU (British Thermal Unit) rating ensures optimal efficiency. A unit that’s too small will struggle to maintain temperatures, while an oversized unit may short-cycle and waste energy.

• 100–300 sq. ft. → 9,000 BTU
• 300–500 sq. ft. → 12,000 BTU
• 500–800 sq. ft. → 18,000 BTU
• 800+ sq. ft. → 24,000+ BTU

2. Consider Your Climate

• If you live in a mild climate, a high-SEER standard model is ideal.
• For cold climates (like the Prairies or Northern Canada), choose a Cooper&Hunter Hyper-Heat model, designed to maintain efficiency down to -30°C.

3. Single-Zone vs. Multi-Zone

• Single-zone mini-splits → Perfect for individual rooms, offices, or apartments.
• Multi-zone mini-splits → Allow heating and cooling in multiple areas using one outdoor unit, offering customized comfort for different spaces.

4. Look for Smart Features

Many Cooper&Hunter models offer:
✔ Wi-Fi connectivity for smartphone control.
✔ Programmable timers & energy-saving modes for reduced costs.
✔ Air filtration & dehumidification for better indoor air quality.

5. Check for Rebates & Incentives

Many Canadian provinces offer rebates for energy-efficient mini-splits. Check with your local energy provider to see if you qualify for savings on your new system.

By considering room size, climate, and features, you can confidently select a Cooper&Hunter mini-split that delivers maximum efficiency and comfort.

Cooper&Hunter Mini-Splits and Canadian Climate Zones

Canada’s climate varies greatly, requiring heating and cooling solutions that can perform well in all conditions. Cooper&Hunter mini-splits are designed to handle everything from mild coastal climates to extreme winter temperatures in the north, making them a great choice for Canadian homeowners.

1. Coastal and Temperate Climates (BC, Maritimes)

• Winters are mild, but summers can be humid, requiring both cooling and dehumidification.
• Cooper&Hunter mini-splits provide energy-efficient cooling while reducing indoor humidity levels for added comfort.

2. Southern Canada (Ontario, Quebec)

• These regions experience hot summers and cold winters, making year-round efficiency a priority.
• Cooper&Hunter’s high SEER & HSPF mini-splits ensure cost-effective heating and cooling, reducing energy bills.

3. Prairie Provinces (Alberta, Saskatchewan, Manitoba)

• Extreme temperature fluctuations, with hot summers and freezing winters, require a reliable HVAC system.
• Hyper-Heat models provide efficient heating even in -30°C temperatures, making them a great alternative to furnaces.

4. Northern Canada

• Sub-zero temperatures for much of the year demand a powerful heating system.
• Cooper&Hunter’s cold-climate mini-splits are designed to maintain high efficiency in the harshest winter conditions, making them one of the best heat pump options for northern homes.

With their ability to adapt to different climate zones, Cooper&Hunter mini-splits provide a versatile, energy-efficient heating and cooling solution for homes across Canada.

Energy Efficiency and Cost Savings of Cooper&Hunter Mini-Splits

One of the biggest reasons homeowners in Canada choose Cooper&Hunter mini-splits is their exceptional energy efficiency, leading to lower electricity bills and long-term savings. Unlike traditional HVAC systems that frequently cycle on and off, Cooper&Hunter mini-splits use variable-speed inverter technology, adjusting power output based on real-time temperature needs. This ensures consistent comfort while consuming less energy.

Since Cooper&Hunter mini-splits do not rely on ductwork, they eliminate the 20-30% energy losses that occur in ducted systems due to leaks and poor insulation. This makes them an excellent choice for both new constructions and retrofits in older homes, where running new ductwork would be costly and inefficient.

By switching to a Cooper&Hunter mini-split, homeowners can expect to save 30-50% on heating and cooling costs compared to electric baseboards, oil furnaces, or inefficient window AC units. Additionally, because Cooper&Hunter models feature high SEER (cooling efficiency) and HSPF (heating efficiency) ratings, they meet or exceed Canada’s energy efficiency standards, making them eligible for rebates and incentives in many provinces.

Maintenance Tips for Long-Lasting Performance

Regular maintenance is essential to keep your Cooper&Hunter mini-split running efficiently for years to come. By following these simple steps, homeowners can reduce energy costs, prevent breakdowns, and extend the lifespan of their system.

1. Clean or Replace Air Filters Regularly

✔ Dust and debris can clog filters, reducing airflow and efficiency.
✔ Clean filters every 2-4 weeks and replace them as needed to ensure optimal air quality and system performance.

2. Keep the Indoor Unit Clean

✔ Wipe down the indoor unit’s surface to remove dust buildup.
✔ Ensure that vents are clear of obstructions to allow for proper airflow.

3. Inspect and Clean the Outdoor Unit

✔ Leaves, dirt, and debris can accumulate around the outdoor condenser, blocking airflow.
✔ Keep the area around the outdoor unit clear and rinse the coils with water as needed to maintain peak efficiency.

4. Check the Drain Line for Blockages

✔ A clogged condensate drain line can cause water leaks and reduce efficiency.
✔ Flush the drain line with warm water or use a vacuum to clear any blockages.

5. Schedule Annual Professional Maintenance

✔ Have a certified HVAC technician inspect the system once a year.
✔ They’ll check refrigerant levels, clean internal components, and ensure all parts are functioning correctly.

Following these maintenance tips will keep your Cooper&Hunter mini-split running at peak performance, ensuring consistent comfort, energy savings, and long-term reliability.

The Role of Cooper&Hunter Mini-Splits in Reducing Carbon Footprint

Cooper&Hunter mini-splits are designed with energy efficiency and environmental sustainability in mind, making them an excellent choice for homeowners looking to reduce their carbon footprint. By consuming less electricity and utilizing advanced refrigerant technology, these systems significantly lower greenhouse gas emissions compared to traditional HVAC systems.

1. Reduced Energy Consumption

✔ Cooper&Hunter mini-splits operate with high SEER and HSPF ratings, meaning they require less energy to maintain a comfortable indoor temperature.
✔ Unlike central HVAC systems, which often run at full capacity, inverter-driven compressors adjust their power output based on actual demand, reducing unnecessary energy use.

2. No Energy Loss from Ductwork

✔ Traditional ducted systems can lose 20-30% of energy due to leaks, poor insulation, and inefficiencies in airflow.
✔ Cooper&Hunter mini-splits deliver conditioned air directly to the space, eliminating these losses.

3. Use of Eco-Friendly Refrigerants

✔ Many Cooper&Hunter models utilize low-GWP (Global Warming Potential) refrigerants, which significantly reduce environmental impact.
✔ Unlike older refrigerants that contribute to ozone depletion and global warming, these modern alternatives help homeowners minimize their carbon footprint.

By choosing a high-efficiency, eco-friendly Cooper&Hunter mini-split, homeowners can reduce greenhouse gas emissions, lower their energy bills, and contribute to a more sustainable future.

Comparing Cooper&Hunter Mini-Splits to Other Brands

When choosing a mini-split system, it’s important to compare different brands to see how Cooper&Hunter stands out. Cooper&Hunter mini-splits excel in energy efficiency, quiet operation, and cold-climate performance, making them a strong competitor against other leading mini-split brands in Canada.

1. Superior Energy Efficiency

✔ High SEER ratings (20-30+) ensure greater energy savings compared to many competing brands.
✔ Advanced inverter technology dynamically adjusts power output to minimize energy waste.

2. Cold Climate Performance

✔ Unlike some mini-split brands that lose efficiency in extreme cold, Cooper&Hunter Hyper-Heat models operate efficiently down to -30°C, making them ideal for Canadian winters.

3. Ultra-Quiet Operation

✔ Cooper&Hunter mini-splits operate at 19-25 dB indoors, making them quieter than most traditional HVAC systems and competing mini-split brands.

4. Affordability vs. Premium Features

✔ While high-end brands may offer similar efficiency, they often come at a higher price point.
✔ Cooper&Hunter provides a strong balance of affordability, performance, and smart features, making it a cost-effective solution for homeowners.

Innovative Features of Cooper&Hunter Mini-Splits

Cooper&Hunter mini-splits are equipped with cutting-edge technology that enhances efficiency, comfort, and ease of use. These features make them a top choice for Canadian homeowners looking for a modern and energy-efficient climate control solution.

1. Hyper-Heat Technology for Cold Climates

✔ Designed to operate in temperatures as low as -30°C, making them ideal for Canadian winters.
✔ Advanced inverter compressors ensure efficient heating without excessive energy use.

2. Advanced Air Filtration & Dehumidification

✔ Multi-stage air filtration removes dust, allergens, bacteria, and other airborne contaminants.
✔ Built-in dehumidification technology regulates indoor humidity, preventing mold growth and improving air quality.

3. Smart Home Integration & Wi-Fi Controls

✔ Many Cooper&Hunter models offer Wi-Fi connectivity, allowing you to control your mini-split via smartphone apps.
✔ Compatible with Google Home and Alexa, enabling voice-controlled temperature adjustments.
✔ Features like programmable timers and eco-modes help maximize energy savings.

With their cold-weather reliability, smart features, and air quality enhancements, Cooper&Hunter mini-splits provide a next-generation heating and cooling solution that is both efficient and user-friendly.

Common Misconceptions About Cooper&Hunter Mini-Splits

Despite their growing popularity, there are still several misconceptions about Cooper&Hunter mini-splits that may cause hesitation among homeowners. Let’s clear up some of the most common myths.

1. “Mini-splits are only for cooling”

Many people assume mini-splits are just air conditioners, but Cooper&Hunter mini-splits provide both heating and cooling. With Hyper-Heat technology, they deliver efficient heating even in temperatures as low as -30°C, making them a viable alternative to furnaces in Canadian homes.

2. “Mini-splits are too expensive”

While the upfront cost of a mini-split may be higher than a window AC unit or baseboard heater, Cooper&Hunter mini-splits pay for themselves over time. Their high SEER and HSPF ratings help homeowners save 30-50% on energy costs compared to traditional HVAC systems. Plus, many provinces offer rebates, making them even more affordable.

3. “Mini-splits are difficult to install”

A Cooper&Hunter mini-split is much easier to install than a central HVAC system because no ductwork is required. A professional installer can typically complete the installation in a single day, making it a fast and minimally invasive upgrade for any home.

By debunking these myths, it’s clear that Cooper&Hunter mini-splits are energy-efficient, cost-effective, and easy to install, making them an ideal heating and cooling solution for Canadian homeowners.

Noise Levels With Cooper&Hunter Mini-Splits

One of the standout features of Cooper&Hunter mini-splits is their ultra-quiet operation, making them a superior alternative to traditional HVAC systems and window units. Unlike conventional air conditioners that cycle on and off loudly, Cooper&Hunter mini-splits use inverter technology to run smoothly at variable speeds, significantly reducing noise levels.

The indoor units of Cooper&Hunter mini-splits typically operate at as low as 19-25 decibels (dB)—quieter than a library or a soft whisper. In comparison, traditional central air systems and window units often produce 40-70 dB, which can be disruptive, especially in bedrooms or office spaces. Even the outdoor units of Cooper&Hunter mini-splits are designed for low-noise performance, averaging around 50 dB, much quieter than the 70+ dB noise levels of conventional HVAC condensers.

For homeowners looking for uninterrupted sleep, quiet workspaces, or a peaceful home environment, Cooper&Hunter mini-splits provide exceptional noise control, ensuring a comfortable climate without the background hum of traditional systems.

Troubleshooting Common Issues with Cooper&Hunter Mini-Splits

While Cooper&Hunter mini-splits are built for reliability and efficiency, occasional issues may arise. Fortunately, most common problems have simple solutions that homeowners can troubleshoot before calling a professional. Here are some frequent issues and how to resolve them:

1. Mini-Split Not Turning On

✔ Check if the circuit breaker has tripped or if the unit is properly plugged in.
✔ Ensure the remote control batteries are fresh and that the unit is set to the correct mode.

2. Weak Airflow or No Cooling/Heating

✔ A clogged air filter can restrict airflow—clean or replace the filter every 2-4 weeks.
✔ Make sure vents and louvers are open and that there’s no blockage around the indoor unit.

3. Water Leaking from the Indoor Unit

✔ The drain line may be clogged—try flushing it with warm water or using a vacuum to remove blockages.
✔ Ensure the unit is properly leveled, as tilting forward can cause drainage issues.

4. Unusual Noises or Vibrations

✔ Cooper&Hunter mini-splits are designed to operate quietly, so any rattling or buzzing could indicate a loose mounting bracket or debris stuck in the fan blades.
✔ Turn the unit off and inspect for any visible obstructions.

5. Remote Control Not Responding

✔ If the remote isn’t working, reset the unit by turning it off at the breaker for a few minutes before restarting.
✔ Ensure the infrared sensor on the indoor unit is unobstructed.

If these troubleshooting steps don’t resolve the issue, it may be best to contact a certified HVAC technician for further diagnosis. Regular maintenance can also help prevent many common problems, keeping your Cooper&Hunter mini-split running smoothly and efficiently year-round.

Upgrading Your Old HVAC System to Cooper&Hunter Mini-Splits

Switching from a traditional HVAC system to a Cooper&Hunter mini-split is a smart investment that provides improved efficiency, lower energy costs, and superior comfort. Whether you’re replacing an old furnace, central AC, or electric baseboard heaters, a Cooper&Hunter mini-split delivers a modern, ductless solution that eliminates energy waste while improving climate control.

1. Easier and Less Invasive Installation

Unlike central HVAC systems that require extensive ductwork, Cooper&Hunter mini-splits are ductless, making installation faster, easier, and more cost-effective. A professional HVAC technician will:
✔ Mount the indoor air handler on a wall or ceiling.
✔ Install the outdoor condenser unit in a suitable location.
✔ Connect the refrigerant lines and electrical wiring between the units.

Most single-zone mini-split systems can be installed in a single day, while multi-zone setups may take longer depending on the number of indoor units.

2. Immediate Benefits After Upgrading

✔ Lower energy bills thanks to high-efficiency operation.
✔ More personalized comfort with zoned heating and cooling.
✔ Ultra-quiet performance, ideal for bedrooms, offices, and living spaces.
✔ No energy losses from ductwork, unlike traditional HVAC systems.
✔ Eligibility for rebates and incentives in many Canadian provinces.

For homeowners looking to replace an outdated, inefficient system, upgrading to a Cooper&Hunter mini-split is a future-proof solution that delivers long-term savings and improved climate control.

Indoor Air Quality Benefits of Cooper&Hunter Mini-Splits

Beyond just heating and cooling, Cooper&Hunter mini-splits significantly improve indoor air quality (IAQ), making them an excellent option for allergy sufferers, asthma patients, and anyone looking for cleaner, healthier air inside their home. Unlike traditional HVAC systems that circulate air through dusty ductwork, Cooper&Hunter mini-splits filter and purify air directly, reducing airborne contaminants.

1. Multi-Stage Air Filtration

✔ Advanced air filters capture dust, pollen, pet dander, and bacteria, reducing allergens in the air.
✔ Many Cooper&Hunter models feature ionization and antimicrobial filters, improving overall air hygiene.

2. Built-In Dehumidification

✔ Excess humidity can lead to mold growth, dust mites, and poor air quality.
✔ Cooper&Hunter mini-splits include dehumidification settings that help maintain optimal indoor humidity levels, preventing moisture-related issues while improving comfort.

3. No Contaminated Ductwork

✔ Traditional HVAC systems often circulate dust, mold spores, and other allergens that accumulate in ductwork over time.
✔ Cooper&Hunter mini-splits are ductless, eliminating the buildup of pollutants and ensuring cleaner, fresher air.

For homeowners looking to enhance their indoor air quality while maintaining energy-efficient climate control, Cooper&Hunter mini-splits provide a superior alternative to conventional HVAC systems.

Cooper&Hunter Mini-Splits for Commercial Spaces in Canada

Cooper&Hunter mini-splits are not just for residential homes—they are an excellent heating and cooling solution for commercial spaces, including offices, retail stores, restaurants, and other business environments across Canada. Their high efficiency, zoned temperature control, and quiet operation make them a cost-effective alternative to traditional HVAC systems in commercial settings.

1. Zoned Climate Control for Business Efficiency

Unlike central HVAC systems that heat or cool an entire building at once, Cooper&Hunter mini-splits allow businesses to customize temperatures in different areas. This is particularly useful in:
✔ Offices with varying occupancy levels throughout the day.
✔ Retail stores where different zones have different cooling or heating needs.
✔ Restaurants where the kitchen and dining areas require separate climate control.

2. Cost-Effective and Energy Efficient

✔ Since Cooper&Hunter mini-splits are ductless, they eliminate duct-related energy losses (which can account for 20-30% of wasted energy in traditional HVAC systems).
✔ Their high SEER and HSPF ratings ensure lower operational costs compared to conventional heating and cooling solutions.
✔ Many commercial buildings qualify for energy rebates, making the investment even more financially beneficial.

3. Quiet Operation for a Better Business Environment

✔ Office employees can focus better without HVAC noise distractions.
✔ Retail customers enjoy a comfortable shopping experience without the sound of loud fans or compressors.
✔ Restaurants provide a pleasant dining atmosphere without excessive HVAC noise.

With quick installation, reduced operating costs, and advanced temperature control, Cooper&Hunter mini-splits provide a scalable and energy-efficient solution for commercial spaces looking to improve comfort and cut energy expenses.

The Future of Heating and Cooling with Cooper&Hunter Mini-Splits

The HVAC industry is evolving rapidly, and Cooper&Hunter mini-splits are at the forefront of energy-efficient, smart climate control solutions. As homeowners and businesses demand better efficiency, lower environmental impact, and enhanced comfort, Cooper&Hunter continues to push the boundaries of heating and cooling technology.

1. AI-Powered Climate Optimization

The future of mini-split technology is moving toward AI-driven temperature control. Future Cooper&Hunter models could incorporate:
✔ Smart learning algorithms that adjust temperature based on user habits.
✔ Automated climate adjustments to reduce energy waste.
✔ Enhanced occupancy sensors that optimize heating and cooling based on room usage.

2. Next-Gen Refrigerants for Sustainability

✔ Cooper&Hunter is committed to using low-GWP refrigerants, which help combat climate change while improving energy efficiency.
✔ As global regulations push for more eco-friendly alternatives, Cooper&Hunter continues to develop more sustainable HVAC solutions.

3. Enhanced Smart Home Integration

✔ Cooper&Hunter mini-splits already support Wi-Fi connectivity and voice controls, but future models may offer:
✔ Full home automation integration with AI-driven energy management.
✔ More advanced smartphone app features, including predictive maintenance alerts.
✔ Greater compatibility with solar power systems, maximizing renewable energy use.

The future of heating and cooling is about smarter, greener, and more efficient solutions—and Cooper&Hunter mini-splits are leading the way. With a focus on cutting costs, reducing carbon footprints, and enhancing comfort, Cooper&Hunter is setting the standard for the next generation of climate control technology.

Cooper&Hunter Mini-Split Models

Cooper&Hunter offers a wide range of mini-split systems, designed to meet the diverse heating and cooling needs of homes, businesses, and even extreme climates across Canada. Whether you need a single-zone unit for a bedroom or a multi-zone system for an entire home, Cooper&Hunter provides energy-efficient, ductless solutions for any space.

Single-Zone Cooper&Hunter Mini-Splits

Perfect for individual rooms, home offices, and small apartments, single-zone mini-splits provide zoned temperature control with high SEER ratings for maximum efficiency.

• Cooper&Hunter Comfort 9000BTU – Best for small spaces (100–300 sq. ft.), featuring Wi-Fi control and ultra-quiet operation.
• Cooper&Hunter Elite 12000BTU – A mid-size option for bedrooms and home offices (300–500 sq. ft.), with advanced air filtration.
• Cooper&Hunter Pro 18000BTU – Ideal for larger rooms or open-concept spaces (500–800 sq. ft.), with smart scheduling and dehumidification.

Multi-Zone Cooper&Hunter Mini-Splits

Designed for homes or businesses needing customized climate control in multiple rooms, multi-zone mini-splits allow up to 4+ indoor units to connect to a single outdoor condenser.

• Cooper&Hunter Dual-Zone 2x9000BTU – Great for two bedrooms or a living room + office setup.
• Cooper&Hunter Triple-Zone 9000/12000/18000BTU – A flexible setup for homes with varied room sizes, allowing independent control in each space.
• Cooper&Hunter Quad-Zone 4x12000BTU – Best for larger homes or commercial spaces needing zoned temperature control across multiple areas.

Cold Climate Series

For Canadian winters, Cooper&Hunter offers Hyper-Heat models designed to maintain efficiency even in temperatures as low as -30°C.

• Cooper&Hunter Arctic 12000BTU – Features a high HSPF rating and a defrost mode for winter heating performance.
• Cooper&Hunter Polar 18000BTU – A more powerful option, maintaining full heating capacity in extreme cold.
• Cooper&Hunter Extreme 24000BTU – Best for larger homes, delivering reliable heating and cooling year-round.

With high energy efficiency, smart technology, and flexible installation options, Cooper&Hunter mini-splits provide a customized climate control solution for any space. Whether you need year-round comfort in a single room or a whole-home heating and cooling system, Cooper&Hunter has a model to fit your needs.

Most Popular Cooper&Hunter Mini-Split to Buy This Year

Among the wide variety of Cooper&Hunter mini-splits, the Cooper&Hunter Arctic 12000BTU has become the most popular choice for Canadian homeowners this year. Its combination of high efficiency, cold-climate performance, and smart technology makes it the go-to option for year-round comfort.

The Cooper&Hunter Arctic 12000BTU is specifically designed for harsh Canadian winters, featuring Hyper-Heat technology that allows it to maintain efficient heating even at -30°C. Unlike conventional heat pumps that struggle in extreme cold, this model uses advanced inverter technology and specialized refrigerants to provide consistent warmth without excessive energy consumption.

Additionally, it offers Wi-Fi connectivity, ultra-quiet operation (as low as 22 dB), and a multi-stage air filtration system that improves indoor air quality. With its high SEER and HSPF ratings, homeowners can expect significant savings on energy bills, making it a cost-effective, reliable, and high-performance choice for heating and cooling. Whether you’re upgrading from an old HVAC system or looking for an energy-efficient solution, the Cooper&Hunter Arctic 12000BTU stands out as the best choice this year.

Cooper&Hunter Mini-Splits FAQ

If you’re considering a Cooper&Hunter mini-split, you likely have some questions about performance, reliability, and installation. Below are the most frequently asked questions to help you make an informed decision.

What makes Cooper&Hunter mini-splits different from other brands?

Cooper&Hunter mini-splits stand out due to their high efficiency, ultra-quiet operation, and advanced cold-climate performance. Their Hyper-Heat technology allows them to provide reliable heating even in temperatures as low as -30°C, making them perfect for Canadian winters.

How reliable are Cooper&Hunter mini-split systems?

Cooper&Hunter mini-splits use high-quality components and inverter-driven compressors, ensuring long-term reliability. With proper maintenance, they can last 15-20 years without major issues.

What is the average lifespan of a Cooper&Hunter mini-split?

Most Cooper&Hunter mini-splits have a lifespan of 15-20 years, depending on usage and regular maintenance. Keeping filters clean and scheduling professional check-ups will help extend their longevity.

Are Cooper&Hunter mini-splits energy efficient?

Yes! Cooper&Hunter mini-splits have high SEER and HSPF ratings, making them significantly more energy-efficient than traditional HVAC systems. Homeowners can save 30-50% on energy costs compared to electric baseboards or central heating.

What is the SEER rating of Cooper&Hunter mini-split systems?

Cooper&Hunter mini-splits typically have SEER ratings between 20 and 30+, making them much more efficient than standard air conditioners and heat pumps.

Can Cooper&Hunter mini-splits heat and cool multiple rooms?

Yes! Multi-zone Cooper&Hunter mini-splits allow homeowners to control temperatures in multiple rooms using a single outdoor unit, providing zoned comfort and reducing energy waste.

What is the installation process for Cooper&Hunter mini-splits like?

A professional HVAC technician will mount the indoor unit, install the outdoor condenser, and connect them with refrigerant lines. Since no ductwork is needed, installation is quick and minimally invasive.

How long does it take to install a Cooper&Hunter mini-split system?

Most single-zone Cooper&Hunter mini-splits can be installed in one day, while multi-zone systems may take longer, depending on the number of indoor units.

Are Cooper&Hunter mini-split systems quiet?

Yes! Indoor units operate as quietly as 19-25 dB, making them quieter than a library or soft whisper. Outdoor units are also designed for low-noise operation, much quieter than traditional HVAC condensers.

Do Cooper&Hunter mini-splits come with a warranty?

Yes, Cooper&Hunter mini-splits typically include a 5- to 10-year warranty on parts and compressors, ensuring long-term peace of mind for homeowners.

How much do Cooper&Hunter mini-split systems cost?

Prices vary based on model and installation complexity, but single-zone systems typically range from $2,500 to $5,500 (including installation), while multi-zone systems cost more.

What are the maintenance requirements for a Cooper&Hunter mini-split?

Regular cleaning of air filters, inspecting refrigerant levels, and keeping the outdoor unit clear are essential to maintaining optimal performance. A professional check-up once a year is also recommended.

Can Cooper&Hunter mini-splits be installed in colder climates?

Absolutely! Cooper&Hunter’s Hyper-Heat models are designed for cold Canadian winters, operating efficiently in temperatures as low as -30°C.

Are there rebates or incentives for installing Cooper&Hunter mini-splits?

Yes! Many Canadian provinces offer rebates and energy efficiency incentives for installing heat pumps like Cooper&Hunter mini-splits. Check with your local energy provider for available programs.

How do Cooper&Hunter mini-splits compare to other leading brands in terms of performance and features?

Cooper&Hunter mini-splits offer comparable or superior performance to top brands like Mitsubishi and Daikin, often at a more affordable price. Their cold-weather reliability, high SEER ratings, and smart features make them a top choice for energy-conscious homeowners.

What size Cooper&Hunter mini-split do I need for my home?

The required size depends on room size:

• 100–300 sq. ft. → 9,000 BTU
• 300–500 sq. ft. → 12,000 BTU
• 500–800 sq. ft. → 18,000 BTU
• 800+ sq. ft. → 24,000+ BTU

Can Cooper&Hunter mini-splits be controlled with a smartphone or smart home system?

Yes! Many models feature Wi-Fi connectivity, allowing control via smartphone apps and integration with Google Home, Alexa, and other smart home platforms.

Do Cooper&Hunter mini-split systems have features like dehumidification or air filtration?

Yes! Cooper&Hunter mini-splits include multi-stage air filtration and built-in dehumidification, improving indoor air quality and comfort.

Are Cooper&Hunter mini-split systems good for older homes or apartments?

Yes! Since they don’t require ductwork, Cooper&Hunter mini-splits are ideal for older homes, apartments, and home additions where installing a traditional HVAC system would be difficult or costly.

What maintenance does a Cooper&Hunter mini-split require to keep it running efficiently?

Regular cleaning of air filters, inspecting refrigerant lines, and checking the outdoor unit for debris will keep your system running at peak efficiency. A professional service check-up once a year is recommended.